玻璃耐沸騰混合堿水溶液侵蝕性測定法是2015藥包材標準中，對于玻璃制品的質量檢測標準當中，其中一種物理性檢測方法，主要是檢測玻璃的耐堿性

而若測定玻璃材質耐堿性時，應考慮表面結構的影響，供試品須經混合酸預處理，其操作如下:在塑料燒杯中放入供試品，加入 40%氫氟酸溶液-2mol/L 鹽酸溶液（1:9）的混合溶液將其完全浸沒

用磁力攪拌器攪拌10分鐘，用鑷子（頭部包有塑料或鉑，用用稀鹽酸處理，再用水洗凈）將供試品取出，按上述方法進行清洗、干燥、冷卻、稱重。

測定法將試驗容器浸入加熱浴池內，在試驗容器內加入0.5mol/L碳酸鈉溶液400ml和 1mol/L氫氧化鈉溶液400ml，使試驗容器內液面與浴液的液面一致。蓋上蓋后安裝上古氏玻璃漏斗和冷凝器，接通冷凝器水流，啟動攪拌器并加熱浴液，

使試驗容器內的溫度達到102.5℃+0.5℃，應控制回流液下滴速度為每4~61滴。然后打開蓋子用銀絲將供試品懸掛在容器蓋子的吊鉤上,將供試品浸入沸騰的溶液中(供試品之間及供試品同容器壁之間不得相互碰撞）連續煮沸3小時2分鐘。將供試品取出，快速放入1mol/L鹽酸溶液里浸泡三次。

用水洗滌三次，后用丙酮或無水乙醇漂凈，置110℃中干燥60分鐘，轉入干燥器中冷卻至室溫，然后精密稱定，記錄其質量（m2）。結果的表示方法和分對每個測得的結果計算供試品單位表面積損失的質量pA

玻璃耐沸騰混合堿水溶液侵蝕性檢測裝置

We have provided more than 8000 sets of packaging material testing instruments for many enterprises concerned with packaging quality control. Sanquan Zhongshi＇s products have been exported to more than 25 countries ａnd regions such as the United States, Britain, India, Indonesia, Turkey ａnd Iran. More than 5600 laboratories around the world are using Sanquan Zhongshi＇s testing instruments. In addition, Sanquan Zhongshi has established a "Joint Laboratory for packaging testing" with Qilu University of technology ａnd a "CCIT Joint Laboratory" with Shanghai micro spectrum. With the establishment of the joint laboratory, Sanquan Zhongshi has deepened its cooperation with testing institutions ａnd scientific research institutions, greatly improving its scientific research ａnd technical strength, It has laid a solid foundation for better exploring cutting-edge packaging testing technology.