亚洲欧洲二区_久久精品三_伦一理一级一a一片_中国做受xxxxxaaaa_自拍av在线_欧洲一区二区视频在线观看

ATG12CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG6CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG3CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG1.5CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG09CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG045CN日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG60CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36N-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG15CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG150CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板： 性a毛片| 91精品国产综合久久久久久豆腐 | 国内自拍第23页 | 亚洲91网站| 亚洲三区视频在线观看 | 久久国产主播精品 | 久草精品在线 | 91年国产在线 | 国产美女操b在线观看 | 91骚片 | 黄视频在线观看网站 | 成人超碰97| 91精品国产91久久综合桃花 | 日本一区二区三区中文字幕 | 日本三级午夜福利 | 天天做天天爱天天综合色 | 国产第一页第二页 | 1024 最新合集 | 午夜精品久久久久久久 | 日本不卡免费在线视频 | 国产精品久久久久一区二区三区厕所 | 黄色a一级 | 国产日韩免费观看 | 久色网站 | 一级日韩一级欧美 | 日韩一区二区三免费高清在线观看 | 亚洲国产日韩欧美你懂的 | 精品久久婷婷一区二区 | 插下面视频 | 一区二区三区四区高清精品免费观看 | 99久久精品久久久久久ai换脸 | 欧美久久一二区 | 国产一区二区视频在线看 | 亚洲码欧美码一区二区三区 | 欧美一区二区在线不卡 | 美乳在线播放 | 黄色片网站在线 | 亚洲欧美色视频 | 欧美精品1区2区 | 黄色网络在线观看 | 精品欧美国产一区二区三区 |