亚洲欧洲二区_久久精品三_伦一理一级一a一片_中国做受xxxxxaaaa_自拍av在线_欧洲一区二区视频在线观看

DIS-IP500CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP200CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP50CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP5CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP05CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DI-1M-IP500CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester  DI-1M-IP series
DI-1M-IP50
Management of an oil pulse tool etc. High precision and lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight and small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright and readable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time and torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing (printer use corresponding to RS232C), and a personal computer, and data can be saved easily.(Taking-in soft use of exclusive use)  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification DI-1M-IP50 DI-1M-IP200 DI-1M-IP500
Measuring range   (at the time of Track)
0.30~50 N?m 3.0~500 kgf?cm 3.0~430 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1800 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
 Peak down Operating range 0.70N?m, 7.0kgf?cm/ lbf?in 7.0N?m, 70kgf?cm/ lbf?in
Accuracy ±0.5%(F/S)(499 or less digit±3digit)
Display The 4 figures digital display of LED
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point and hold.
Display zero clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity (baud rate 9600)
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part Weight About 600g
Detection part Weight about 600g about 1kg about 2.5kg
Meter part Outside size 146(W)×115(D)×48(H) (It does not contain by the projection part)
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)
Attache case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
Detection machine outside figure
Form IP50 IP200 IP500 Detector size
Φ50 Φ60 Φ80
63 73 99
10 10 15.5
Φ90 Φ110 Φ140
Φ74 Φ90 Φ116
(Three division) Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 9.5sq 12.7sq 19sq
Weight 632g 1.8kg 3kg

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester  DI-1M-IP series
DI-1M-IP50
Management of an oil pulse tool etc. High precision and lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight and small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright and readable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time and torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing (printer use corresponding to RS232C), and a personal computer, and data can be saved easily.(Taking-in soft use of exclusive use)  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification DI-1M-IP50 DI-1M-IP200 DI-1M-IP500
Measuring range   (at the time of Track)
0.30~50 N?m 3.0~500 kgf?cm 3.0~430 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1800 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
 Peak down Operating range 0.70N?m, 7.0kgf?cm/ lbf?in 7.0N?m, 70kgf?cm/ lbf?in
Accuracy ±0.5%(F/S)(499 or less digit±3digit)
Display The 4 figures digital display of LED
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point and hold.
Display zero clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity (baud rate 9600)
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part Weight About 600g
Detection part Weight about 600g about 1kg about 2.5kg
Meter part Outside size 146(W)×115(D)×48(H) (It does not contain by the projection part)
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)
Attache case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
Detection machine outside figure
Form IP50 IP200 IP500 Detector size
Φ50 Φ60 Φ80
63 73 99
10 10 15.5
Φ90 Φ110 Φ140
Φ74 Φ90 Φ116
(Three division) Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 9.5sq 12.7sq 19sq
Weight 632g 1.8kg 3kg

DI-1M-IP200CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester  DI-1M-IP series
DI-1M-IP50
Management of an oil pulse tool etc. High precision and lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight and small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright and readable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time and torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing (printer use corresponding to RS232C), and a personal computer, and data can be saved easily.(Taking-in soft use of exclusive use)  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification DI-1M-IP50 DI-1M-IP200 DI-1M-IP500
Measuring range   (at the time of Track)
0.30~50 N?m 3.0~500 kgf?cm 3.0~430 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1800 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
 Peak down Operating range 0.70N?m, 7.0kgf?cm/ lbf?in 7.0N?m, 70kgf?cm/ lbf?in
Accuracy ±0.5%(F/S)(499 or less digit±3digit)
Display The 4 figures digital display of LED
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point and hold.
Display zero clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity (baud rate 9600)
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part Weight About 600g
Detection part Weight about 600g about 1kg about 2.5kg
Meter part Outside size 146(W)×115(D)×48(H) (It does not contain by the projection part)
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)
Attache case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
Detection machine outside figure
Form IP50 IP200 IP500 Detector size
Φ50 Φ60 Φ80
63 73 99
10 10 15.5
Φ90 Φ110 Φ140
Φ74 Φ90 Φ116
(Three division) Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 9.5sq 12.7sq 19sq
Weight 632g 1.8kg 3kg

DI-9M-8CEDAR扭力測試儀

DI-9 series is most suitable for checking and controlling the torque of Electric Screwdriver and Torque Driver.
upgrade The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed   N-m <=> kgf-cm <=>lbf-in  Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds.
  
The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P).
Specification DI-9M-8 DI-9M-08
Measuring range 0.020-8 N?m 2.0-800 mN?m
0.20~80 kgf?cm
0.020~8 kgf?cm
0.20~70 lbf?in 0.020~7 lbf?in
Accuracy   ±0.5% (499 digit or less ±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Zero return by one touch Return to zero by pressing clear button.
Measurement   Mode
Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
High and low limits judging function
High and low value are measurement within the limits, and can be set up.
Real-time Output
Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum, and the average value display
The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels.
Data Output ASCII format (baud rate 19200)
Auto power save 10 minutes no use, automatically switch off.
Power supply Ni-Cd chargeable battery 1.2V × 5cells 700mAh
Charging time About 3hours
Continuous working time About 12hours
clearance It is a display clearance in set-up time.   (0.1 - 3.0 sec)
Socket size □ 20mm/ □9.5mm
Dimension / Weight W:160×D:125×H:55 / About 1kg
Recommend buffer accessories Measuring joint OW-20/OW-60 Measuring joint OW-025/OW-10
Cube (with a 5th page screw hole) 20x20x20  (M2.6/M3/M4/M5/M6 Tap processing)
AC/DC adaptor
Exclusive receipt case
An inspection report, a proofreading certificate, a traceability system figure

※Do not use for measurement of impact tool.Do not apply more than the specified torque. 

● MEASURING JOINT OW series
OW joint   Since our company developed the buffer     with little influence of fricative,     stable measurement could be performed    Moreover ,it does not need to reverse-rotate     at the time of  measurement,     and work efficiency  improved.
Specification Type
OW-025 OW-10 OW-20 OW-60
Measuring range   N?m 0.25 1 2 6
Mechanical life   (times) 10,000 8,000 5,000 5,000
Outer diameter size (mm) Bit engagement part (screw part) M2.6 cross recess screw M3 cross recess screw M4 cross recess screw M6 cross recess screw
The standard screw is cross recess screw but they may be altered as necessary
Outside diameter φ28 φ32 φ32 φ38
Height 44 51 51 69
Installation 20square ×4(t)

DI-1M-IP50CEDAR扭力測試儀

Management of air tool / oil pulse tool
●Torque Tester  DI-1M-IP series
DI-1M-IP50
Management of an oil pulse tool etc. High precision and lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight and small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright and readable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element,  and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time and torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing (printer use corresponding to RS232C), and a personal computer, and data can be saved easily.(Taking-in soft use of exclusive use)  □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.  
Specification DI-1M-IP50 DI-1M-IP200 DI-1M-IP500
Measuring range   (at the time of Track)
0.30~50 N?m 3.0~500 kgf?cm 3.0~430 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1800 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
 Peak down Operating range 0.70N?m, 7.0kgf?cm/ lbf?in 7.0N?m, 70kgf?cm/ lbf?in
Accuracy ±0.5%(F/S)(499 or less digit±3digit)
Display The 4 figures digital display of LED
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold
T-R  Track Indication of real time torque value.
P-D  Peak down Indication peak down point and hold.
Display zero clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow Measurement range Zero to 99 blow
Measurement time 0.1 - 9.9 seconds
Data output RS232C conformity (baud rate 9600)
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 5 minutes no use, automatically switch off.
Charging time From empty - less than 6hours
Continunous working time 8 hours
Meter part Weight About 600g
Detection part Weight about 600g about 1kg about 2.5kg
Meter part Outside size 146(W)×115(D)×48(H) (It does not contain by the projection part)
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)
Attache case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, traceability system figure
Detection machine size figure
Detection machine outside figure
Form IP50 IP200 IP500 Detector size
Φ50 Φ60 Φ80
63 73 99
10 10 15.5
Φ90 Φ110 Φ140
Φ74 Φ90 Φ116
(Three division) Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 9.5sq 12.7sq 19sq
Weight 632g 1.8kg 3kg

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板: 91福利视频一区 | a黄在线观看 | 老司机午夜福利视频免费播放 | 国产亚洲综合性久久久影院 | 亚洲福利在线免费观看 | 国产欧美在线观看免费 | 久久国产影视 | 日韩欧美在线1卡 | www.伊人.com | 久草在线免费新视频 | 国产最顶级的黄色片在线免费观看 | a级毛片 | www.操操操| 在线观看视频一区二区三区 | 国产传媒高清大全一二 | 欧美国产综合视频 | 国产精品久久久久影视 | 福利一区二区三区视频在线观看 | 晚上在线观看 | 大地资源网在线观看免费动漫 | 奇米影视四色在线 | 91p亚洲| 久操视频在线看 | 久久777国产线看观看精品 | 亚洲三级国产 | 一级国产精品一级国产精品片 | 日本在线观看视频网站 | 精品国产九九 | 日韩美女一级毛片 | 九九久视频 | 国产精品网红视频 | 2020天天干夜夜爽 | 国产chinasex麻豆videos | 9l久久午夜精品一区二区 | 刘亦菲毛片一区二区三区 | 久久精品国产免费观看 | 麻豆一区在线 | 久久99精品久久久久久园产越南 | 国产一级视频 | 亚洲一区二区不卡视频 | 欧美bbbb内谢 |