亚洲欧洲二区_久久精品三_伦一理一级一a一片_中国做受xxxxxaaaa_自拍av在线_欧洲一区二区视频在线观看

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板: 国产亚洲免费在线观看 | 噜噜88av偷拍 | 稀缺小u女呦精品呦 | 亚洲精品久久久中文 | 披荆斩棘的哥哥第三季在线观看免费 | 久草免费福利 | 91网址在线播放 | 久久专区 | 色狠狠干 | 免费看a网站 | 久草在线手机视频 | 一级毛片久久久久 | 亚洲欧美综合乱码精品成人网 | 国产精品久久久久久久久久久免费 | 成年在线免费视频 | 日韩精品在线免费观看 | 剑来动漫免费观看 | 亚洲无码手机在线观看视频 | 五月天久久激情 | 91成人在线精品视频 | omofun 动漫在线观看 | 日韩第二十一页 | 浮生影院大全免费观看中文版 | 水蜜桃久久夜色精品一区怎么玩 | 免费在线播放黄色 | 日本乱码卡一卡2卡3卡三卡四 | 国产xxxx| 麻豆小视频在线观看 | 好属妞这里只有精品 | 浮生影视网在线观看免费 | 麻豆aaa级片| 精品久草 | 九九亚洲精品 | 99九精品| 免费视频看片网站 | 精品少妇一区二区 | 亚洲国产精品一 | 免费在线观看一级片 | 91精品国产91久久久久福利 | 久草国产在线视频 | 亚洲日本乱码在线观看 |